Give your robots the ability to see and adapt in real time.
Inbolt is a vision-guided robotics platform that closes the loop between AI perception and motion control. No fixtures. No datasets. Deploy on the robots you already own in days, not months.
Real-time 3D vision
CAD-trained in minutes
Any robot, any station
Proven at scale
Your robots are blind. That’s why every station is a custom project.
Traditional vision and fixed tooling assume a world that doesn’t exist on the factory floor. Parts move. Lighting shifts. Variation is the rule, not the exception.
Six-figure integration
Custom jigs, fixtures, sensors and wiring for every new part or line. Capital cost scales with every station.
Weeks or months to deploy
Engineering, testing, fine-tuning. Lines down while integrators do bespoke work you’ll redo next quarter.
Inflexible to reality
Part variation, moving lines and poor lighting break most vision systems. Downtime, retuning, and unreliable throughput.
One vision-guided platform. Every robot. Every part.
Inbolt’s vision model localises any part in 6DoF from a CAD file and streams corrected joint commands to the robot at servo frequency. Robots that see, adapt, and execute, continuously.
Real-time 6DoF vision
0.3 mm accuracy. 80 ms latency on moving lines. Servo-frequency control up to 500 Hz. Robots adapt to reality, not a stale plan.
No fixtures, no datasets
Trains on CAD alone in under 10 minutes. No labelling, no vision expertise, no custom tooling to maintain.
Days to deploy. On robots you own.
Retrofit existing cells or commission new ones. 6 to 12 month payback across typical deployments.
Proof, not promises.
200+ Inbolt systems running in 100+ factories across three continents. 40M+ robot cycles powered in 2025.
200
200 +
Inbolt systems delivered globally
95
95 %
Bin-picking success rate (real-world)
97
97 %
Reduction in downtime (retrofit case)
12
12 mo
Typical ROI payback period
Trusted by the world’s top manufacturers
“We are very happy with the automation. We’ve seen nearly no malfunctions and our results in the water tests are very good. Repairs per thousand have gone close to zero.”
Steffen Münch
“Inbolt’s 3D vision solution gave us the answer we needed. We’ve taken the strain off our operators and we’re below 1% non-compliant tightening.”
Gilles Gaeng
“Retrofitting the line with vision turned a high-risk, high-maintenance station into a reliable cell, no mechanical re-engineering needed. We’re now scaling the project to similar cells across the plant.”
Loda Bazzi
From CAD to servo control, in real time.
Three components. One platform. Zero integration gaps.
Train from CAD
Upload the part CAD. Inbolt’s vision model trains on-premise in under 10 minutes. No labelled data, no cloud.
Perceive in 6DoF
On-arm camera localises parts in position and orientation to 0.3 mm accuracy, independent of lighting or fixtures.
Adapt in real time
Inbolt streams corrected joint commands to the robot controller at servo frequency. The robot follows reality.
Built for the applications you can’t fixture your way out of.
Bin-picking. Fastening. Pick & place. Dispensing. Stationary or moving-line automation. One model, every application.
Bin-picking
Fastening
Pick & place and De-racking
Dispensing
See what vision-guided robotics looks like on your line.
Book a 30-minute demo with an Inbolt automation engineer. We’ll walk through your application, show comparable deployments, and talk through ROI and deployment time.
